Cement adhesive – VHCT SILVER type C2TE

  • Apply finely (up to 10 mm). For use in bonding architectural slabs of concrete and natural stone, floor and wall surfaces indoors and outdoors. For use in Situations Requiring bonding with Increased flexibility and strength, as well as on surfaces like:
– walls

– floors

– Balconies, terraces, garages


PRODUCT DESCRIPTION Ready to use, dry, powder, packaged mixture of binder (Portland cement), natural aggregates and improvement additives. Mix with water to form construction adhesive Mortars type C2TE.
  • Resistant to the impact of adverse weather conditions (moisture and frost) and blistering;
  • Allows for flexibility, strength, clinging and shrinkage;
  • Efficient and easy to apply, with a long open pot time .

Bulk density:

Temperature range of works:

Initial tensile strength:

Tensile strength after immersion in water:

Tensile strength after thermal aging:

Tensile strength after freeze-thaw cycles:

Workability time:

Open time:

Adjustment time:

Runoff (slippage)

Transverse deformation:

Min. / Max. thickness of mortar layer:

Seasoning time before grouting:

The content of chromium (VI) in the final weight:


*) Times dependent on humidity and temperature, and the type of substrate and tiles


< 1.4 g / cm 3 ,

from + 5 ° C to + 25 ° C,

0.4; 1.0 N / mm 2 ,

0.2; 0.5 N / mm 2 ,

> 0.5 N / mm2.


> 1.2 N / mm 2

<110 min. *

> 20 min. *

> 15 min. *

<1.0 mm

2.1 mm

2/5 mm.

approx. 36 h,

< 0.0002%


From approx. 2.5 kg / m 2 to approx. 5 kg / m 2 , depending on the type of slabs and the thickness of adhesive.

The amount of the cement adhesive used depends on the local conditions and it is recommended to perform a test area on representative substrate.
PACKAGE Layered bags of 25 kg.